Hardware: Difference between revisions

Latest revision as of 21:55, 25 June 2024

We have upgraded to a Dell PowerEdge T430, here are the new specs:

2x Intel® Xeon® CPU E5-2667 v4 @ 3.20GHz (Broadwell) (8-cores each, 8-threads each, 32 logical cores total)
128GB ECC RAM
2x 10/100/1Gb Broadcom In-built Network Card (1x Connected @ 1Gb)
10/100/1Gb Realtek PCIe Network Card (Connected @ 1Gb for KVM Virtual Machine/FreePBX)
1x480GB SATA 3.0 Solid State Drive, mounted as / (Btrfs without snapshots, GPT)
8x8TB 7200RPM SAS-3 Hard Drives using Dell PERC H730P hardware controller with RAID-5, mounted as /storage (Btrfs, GPT, 50TB Total) with 2GB battery back-up cache
Dell iDRAC 8 system management

@@ Line 1: / Line 1: @@
-This is the list of hardware available for this server:
+We have upgraded to a Dell PowerEdge T430, here are the new specs:
-* HP Proliant DL380 G4 SCSI
+* 2x Intel® Xeon® CPU E5-2667 v4 @ 3.20GHz (Broadwell) (8-cores each, 8-threads each, 32 logical cores total)
-* 2x Intel Xeon Processors @ 3.2GHz + Hyper-threading (4 processors detected)
+* 128GB ECC RAM
-* 8GB ECC RAM
+* 2x 10/100/1Gb Broadcom In-built Network Card (1x Connected @ 1Gb)
-* Smart Array 6i SCSI controller
+* 10/100/1Gb Realtek PCIe Network Card (Connected @ 1Gb for KVM Virtual Machine/[[FreePBX]])
-* 2x Gigabit Ethernet NIC (bonded for 2Gb output with Round Robin balancing)
+* 1x480GB SATA 3.0 Solid State Drive, mounted as / (Btrfs without snapshots, GPT)
-* 2x36GB 15k SCSI Hard Drives configured in RAID1+0, mounted as / (ext4, GPT)
+* 8x8TB 7200RPM SAS-3 Hard Drives using Dell PERC H730P hardware controller with RAID-5, mounted as /storage (Btrfs, GPT, 50TB Total) with 2GB battery back-up cache
-* 2x72GB 15k SCSI Hard Drives configured in RAID1+0, mounted as the /mysql folder (ext4, GPT)
+* Dell iDRAC 8 system management
-* 2x72GB 15k SCSI Hard Drives configured with RAID1+0, mounted as /srv/www/htdocs folder (ext4, GPT)
-* 2x1TB 7200 SATA Hard Drives enclosed and connected by USB using Linux RAID1, mounted as /storage (ext4, GPT)
-* HP iLO 1.94 support via Ethernet